The i80 represents the pinnacle of productivity on today’s jobsite. Leading technology with superior capabilities, the i80 has tracks all five constellations, ten frequencies, and uses every connectivity method available. The i80 is the smallest receiver on the market incorporating dual hot swappable batteries, allowing continuous uninterrupted work. All these features integrated into a small ergonomic package results in the most productive day of surveying possible.
Features
▪ Light & ultra-rugged eliminates user fatigue
▪ Tilt & azimuth allow for more shots to be collected using RTK
▪ Advanced connectivity integrates into any process with nearly any hardware
▪ Common work flows without a data collector
▪ Future proof design for years of productivity
Specification
| GNSS characteristics | |
| 220 channels | with simultaneously tracked satellite signals |
| GPS: L1C/A, L1C, L2C, L2E, L5 | |
| GLONASS: L1C/A,L1P, L2C/A, L2P, L3 | |
| SBAS: L1C/A, L5 (QZSS, WAAS, EGNOS, GAGAN) | |
| Galileo: E1, E5A, E5B | |
| BeiDou: B1, B2 | |
| GNSS Accuracies(1) | |
| SBAS differential positioning accuracy: 0.5 m RMS | |
| High-precision static | Horizontal: 3.0 mm + 0.1 ppm RMS |
| Vertical: 3.5 mm + 0.4 ppm RMS | |
| Post-Processed Kinematic (PPK) | Horizontal: 8 mm + 1 ppm RMS |
| Vertical: 15 mm + 1 ppm RMS | |
| RTK | Horizontal: 8 mm + 1 ppm RMS |
| Vertical: 15 mm + 1 ppm RMS | |
| Initialization time < 5 s | |
| Initialization reliability > 99.9% | |
| Network RTK | Horizontal: 8 mm + 0.5 ppm RMS |
| Vertical: 15 mm + 0.5 ppm RMS | |
| Initialization time < 10 s | |
| Initialization reliability > 99.9% | |
| Hardware | |
| Dimensions (H×W) | 14 cm × 12.4 cm (5.5 in x 4.9 in) |
| Weight | 1.22 kg (2.69 lbs) with batteries |
| Environment | |
| Operating | -40 °C to +75 °C (-40°F to 167°F) |
| Storage | -55 °C to +85°C (-67°F to 185°F) |
| Humidity | 100% condensation |
| Dust and Waterproof | IP68, protected from temporary immersion to depth of 1 m (unit floats) |
| Shock and vibration | 3 m (9.8 ft) pole drop onto concrete, MIL-STD-810G |
| LCD | 128x64dpi sunlight readable with function/accept buttons |
| Certification and Calibrations | |
| FCC Part 15 (Class B Device), FCC Part 22, 24, 90; CE Mark; C-Tick; Bluetooth EPL, NGS Antenna Calibration, MIL-STD-810G. | |
| Communications and Data Recording | |
| Serial | 2 x 7pin LEMO port (external power, USB data download, USB update, RS-232) |
| External Power | 12 to 36 VDC |
| USB | v2 – mounts as high-speed USB thumb drive |
| Cellular | Internally integrated 3.75G modem (optional 4G modem) |
| HSPA+ 21 Mbps (download), 5.76 Mbps (upload) | |
| WCDMA 850/900/1700/1900/2100 | |
| EDGE/GPRS/GSM 850/900/1800/1900 | |
| Bluetooth® | Internally integrated multimode system compatible with Android, Windows Mobile, iOS and Windows desktop operating systems |
| WiFi | 802.11 b/g/n, access point mode |
| UHF Radios (2) | Protected TNC Female |
| Standard | Internal Rx/Tx: 450 – 470 Mhz; transmit power: 0.1 W to 2 W, protocol CHC; range: 5 km optimal conditions |
| Option 2 | FCC Certified Internal Rx/Tx: 403- 473 MHz; transmit power: 0.1 W to 1 W, protocols Trimble, Satel, Pacific Crest; range: 5 km optimal conditions |
| Protocols | CMR: CMR+, sCMRx input and output |
| RTCM: 2.1, 2.2, 2.3, 3.0, 3.1, 3.2 input and output | |
| NMEA 0183 output | |
| HCN and RINEX static formats | |
| NTRIP | |
| Data Storage | 32 GB high-speed memory (upgradable to 64 GB) |
| Electrical | |
| Power consumption | <3.2 W |
| Li-ion battery capacity | 5200 mAh, 7.4 V |
| Operating time | Setup of multiple data stream |
| External power | 12 to 36 V DC |
(1) Accuracy and reliability specifications may be affected by multipath, satellite geometry and atmospheric conditions. Performances assume minimum of 5 satellites, follow up of recommended general GPS practices.
(2) UHF type approvals are country specific.
(2) UHF type approvals are country specific.
Specifications are subject to change without notice.
