DESCRIPTION
Thanks to advanced aerodynamics, the hand launch has never been easier. All you need is to press the take-off button and throw EasyMap
into the wind as soon as motor starts turning. Due to one piece construction, our UAV is very robust and flight preparing time is reduced to
less than 5 minutes. No heavy or complicated launcher is required. After take off, EasyMap is cruising 75-80 km/h.
This gives it superb resistance to weather conditions.
All the data read from the sensors are sent to the groundstation, where they are presented.
The user has also access to the current flight parameters in the real time.
MISSION PHASES
|
|
- Mission preparing – after charging batteries and marking your target on GroundStation you are ready for flight.Preparations usually take not more then 5 minutes.
|
|
- Take off – is fully automatic. All you need to do is press a button and throw EasyMap into the wind.
|
|
- Flight – after take off, UAV will circle around home point waiting for your orders.
|
|
- Mission – by pressing the button on RC transmitter you can send it to the mission and start making pictures.
|
|
- After performing mission EasyMap will wait for your next order. You can land in automatic mode or use SuperSafe Semiautomatic landing.
- Using this mode results in ultra low landing speed. All you need to do is to point the landing direction.Now you can ask ‘why semiautomatic landing is safer?’.
- The answer is simple: people have ayes, UAV’s don’t. As an operator you can easily avoid obstacles. And its easier than driving small RC car.
|
|
- Picture collection – just take SD card out of the camera.
|
|
- Picture positions and orientation angles – can be easily downloaded using dedicated software.
|
|
- Mapmaking – just put collected data into professional software as Pix4D.
|
